Embedded Validation

UUID: 542C4175-30A6-4498-8BE9-2DDDE4A65002

Embedded validation shall include:

  • detector-interface timing checks for fM, SH, ICG, and the ADC-trigger function against the approved timing requirements;

  • ADC/DMA capture checks confirming all 3648 effective pixels are acquired in order without an unreported incomplete frame;

  • minimum-rate checks confirming complete 3648-effective-sample frames are acquired and transferred at least 10 frames per second at the minimum integration time; this subsystem minimum is distinct from the system design target above 100 frames per second;

  • USB CDC checks confirming that complete frames carry identity and status information as defined by Integration;

  • control checks confirming that start, stop, and integration-time requests are received and handled according to the shared control contract. The application boundary at which a request takes effect is Not In Docs; and

  • regression checks after changes to timing, acquisition, transport, or frame ownership responsibilities.

Stress duration, repetition count, packet-field checks, timeout semantics, dropped-frame criteria, evidence retention, and the independent stream-inspector procedure are Not In Docs and are owned by the shared verification plan.

Each check shall record its requirement identifier, hardware/configuration revision, evidence artifact, and pass/fail or unresolved disposition.