Validation

Planned Client Validation Steps

UUID: 95E711D5-FA43-48BE-B294-3FDFF36FFE13

Local Traceability ID: 2ED19D37

Alignment State: Not Started

Step 1: Connect the instrument through the documented operator workflow.

Expected Outcome: Connection readiness is visible and acquisition actions remain gated until readiness is established.

Step 2: Begin an acquisition session.

Expected Outcome: The session state becomes visible and complete frames become eligible for processing and retention.

Step 3: Confirm live spectral presentation.

Expected Outcome: A qualified intensity-versus-wavelength view is presented; rolling spectrogram behavior is available when selected.

Step 4: Request an integration-time change.

Expected Outcome: The operator can distinguish a successful, rejected, or unavailable future command outcome and can identify when a successful value becomes active.

Step 5: Select or apply the calibration inputs required by the planned measurement.

Expected Outcome: Active bias/dark, wavelength, flat-field/PRNU, and spectral-response/QE selections are visible, and missing or incompatible inputs are not silently activated.

Step 6: Initiate CSV export for the retained session.

Expected Outcome: The planned export contains raw ADC counts, processed counts, wavelength, volts, and processed intensity with row correspondence.

Step 7: Review the resulting spectrum and the verification evidence record.

Expected Outcome: Requirement identity, setup, raw observations, derived metrics, criterion state, artifact location, and review state are present.

Rationale: The client workflow demonstrates the intended routine path from connection through evidence review without requiring source-code or hardware reconfiguration.

Open Requirement: Overall client-demonstration criterion, permitted setup assistance, timing limit, evidence-retention rule, and reviewer authority are Not In Docs.